Description
- Compatible with Raspberry Pi 3 2 Model B Rpi B+ B A, The LCD panel Need Kuman 12V 2A power supply, Enter Asin: B01GDX6PW4 to order
- Resolution: 1024x 3(RGB)x600 Panel Size: 7.0 inches;40Pin
- Easy to connect to your Raspberry pi motherboard and see the project program and pictures by the LCD
- VGA + 2AV + HDMI control controller board
- Display Mode:TN, Normally White, trans-missive
General Specifications
-LCD size: 7.0 inches(Diagonal)
-Driver element: a-Si TFT active matrix
-Resolution:1024*3(RGB)*600
-Display mode: Normally white, Trans-missive
-Dot pitch: 0.05(W) x 0.15(H) mm
-Interface: Digital
Driver Board Interfaces
1.Power supply(5-12V 2A), The LCD Panel donot include power charger, you can order Kuman 12V 2A power supply (Asin:B01GDX6PW4 )from usThe LCD Panel donot include power charger, you can order Kuman 12V 2A power supply (Asin:B01GDX6PW4 )from us.
2.HDMI
3.VGA Connector
4.AV1
5.AV1+AV2
6.Keyboard
7.TTL Signal
8.LVDS Signal 1/2 ch 6bit 8bit
9.12V Backlight
10.Inverter Connector
Notice 1: Power supply NOT included,without Touch Panel, if need Touch Panel, please contact us.
Notice 2: This controller board support Automatically switch to AV2 (View Reversing camera).
Operating voltage: Power supply(5-12V >1A ), can be directly from the computer USB port or power bank!(special reminder: the use of the power plug polarity requirements for: inside positive and outside negative-Positive and negative can not be reversed, so as not to damage the circuit board)
Notice 3: The five buttons are as follows: S1 = Power, S2=Menu/Select, S3=Up, S4=Down, S5=Video Source Select